Do You Receive High Energy Bills? 4 Furnace Repairs That Might Fix The Problems
Energy bills are probably highest during freezing and hot months. When your furnace runs continually to keep your loved ones warm, you can expect slightly high energy bills for the period. However, the utility bill should not skyrocket to unfathomable figures. You'll want to hire a heating contractor to help you fix the problem causing high energy bills in your home. The following are a few possible repairs the expert might attempt.
1. Leaky Ductwork Repair
Heated air from the furnace travels through ductwork to different parts of the house. If the ductwork has holes or punctures, the furnace will likely work harder to meet the expected output. As a result, it will use up a lot of energy, eventually increasing your energy bills. The heating contractor will inspect your ductwork for damage and patch up any holes. If it is severely damaged, you might need to replace the ductwork. Without air leakage, your furnace will distribute heat within a short time, saving energy.
2. Fixing Thermostat Issues
Thermostats detect the indoor temperature and control the entire heating system. It sends signals to the central system in the furnace to continue operating until the desired temperature is met. However, if you have a faulty thermostat, the gadget will struggle to detect environmental temperatures and send wrong signals to the furnace.
As a result, the furnace might work harder and longer to reach your desired temperature. It will use a lot of energy that might reflect in your bills. You might need a heating contractor to recalibrate the device or install a new one.
3. Retrofitting the Furnace
Another major reason your furnace could consume a lot of energy is its old age and worn-down components. While routine maintenance and timely repairs strive to extend the lifespan of your system, some parts wear out faster than others, drastically reducing the system's efficiency. You could consider retrofitting the system if you are not ready to replace the system. The technician will take out components such as the heat pump, blower motor, flame sensors, and burners and replace them with more efficient parts to improve performance.
4. Change Air Filters
Some furnaces have air filters to ensure a clean, warm air supply. Over time, the filters might trap dirt and debris, slowly impeding the free flow of air into your home. This pushes the furnace to work beyond its limits and wear down various components, reduce efficiency, and use a lot of energy. Therefore, ask the heating contractor to change or clean the filters to reduce electricity consumption.
If you are concerned about your recent energy bills, it might be time to get the furnace checked. A reliable heating contractor will inspect and diagnose the heating system and provide a suitable solution to improve energy consumption.
Share